How to Set Serial Number for Laser Marking?

Check "Enable Variable Text", click "Add", and select "Serial Number" to start setting.

Mode: The mode current series number used, see the figure.

Dec: Series number carry according to decimal system, the effective character is from zero to nine.

HEX: Series number carry according to capital letter hexadecimal system, the effective character is from Ato F.

hex: Series number carry according to small letter hexadecimal system, the effective character is from a to f.

User define: The series number carry defines according to user define system, after selecting, the system will display a dialog box like Figure shows.

The user can define carry ways discretionary between 2 to 64, only needs to define the max number, and then revises each serial number correspondence the text.

Start SN: This item indicates the first serial number to be marked at the present.

Current SN: the serial number to be marked at the present.

Limit: when mark the limit serial number, it will back to start serial number automatically.

Increment: the increment of the current serial number. The value may be plus or minus.

When the increment is “1”, and if the starting serial number is 0000, there will be an increment “1” added on the previous serial number. For example, 0000, 0001, 0002, 0003 … 9997, 9998, 9999, and when it comes to 9999, the system will be back to 0000 automatically.

When the increment is “5”, and if the starting serial number is 0000, the serial number is: 0000, 0005, 0010, 0015, 0020, 0025 …

Others can be analogized by this.

Marks per: the marked number. This item indicates how many times every serial number is marked before changing.

Current num: the marking time of current serial number, when marking number equals to marks per, it will turn to 0 automatically.

if click “Filter belows“, software won’t mark special number in special digit.

won’t mark numbers end with 4, * means any digit.

Reset: The number will become the start SN in the set time.