There are three reasons for this problem, please eliminate them one by one in order. Reason 1: Poor contact of the foot switch of laser…
READ MORE ->
Laser Marking
Why the Laser Marking Machine Power Indicator Does Not Light Up?
Sometimes when using the laser marking machine, there will be a series of problems, such as the power indicator light of the laser marking machine…
READ MORE ->
Why Does the Laser Marking Machine Alarm?
There are generally three reasons for the alarm of the laser marking machine: (1) The software does not work, the motherboard is loose. Remove the motherboard…
READ MORE ->
Machine Parameter: Other
1)Enable barcode quick RBI mode: The two-dimensional dot matrix code, such as the laser response time less than 100ms, can enable the fast dot mode,…
READ MORE ->
Machine Parameter: Hardware info
Hardware information includes board type, version number, function code and other information.
Machine Parameter: Axis Solution
The diagram shows the selection of the expansion axis program. The corresponding axis control is selected. The axis control can be parameterized, such as the…
READ MORE ->
Machine Parameter: Scanner
Scanner type: Currently supports 16-bit, 18-bit XY2-100, and NEWSON 18-bit and NEWSON 20-bit.
Machine Parameter: Dynamic Focus
Enable: Whether to enable dynamic focus mode.
Machine Parameter: 3D
Enable: Whether to enable 3D mode.
Machine Parameter: Fly Mark
1)Enable: Enable the fly marking function. 2)Enable speed simulation: Enable the pipeline speed in hardware simulation mode. 3)Pipeline from right to left: Check to indicate…
READ MORE ->