Insufficient memory is not the hard disk memory, but the running memory. 1. The software cache is not automatically reset and the CPU is full, so…
READ MORE ->
Laser Marking
How to Set Serial Number for Laser Marking?
Check “Enable Variable Text”, click “Add”, and select “Serial Number” to start setting. Mode: The mode current series number used, see the figure. Dec: Series number carry…
READ MORE ->
Mark Parameter: Laser On TC, Laser Off TC, End TC, Polygon TC
Laser On TC: When the scanhead has to execute a mark command, the scanner mirrors first have to be accelerated up to the defined marking speed. In…
READ MORE ->
Can JPG and PNG Formats Images Be Marked Directly on the Ring?
Although the picture can be marked, the colored places according to the gray value of the picture are also printed out. It is best to…
READ MORE ->
How to Set Marking Twice by Pressing F2 Once?
Because it is a 20W laser marking machine, it is a little bit not clear enough, so I will mark twice. But I have to…
READ MORE ->
Lines Are Not Straight When Marking the Grid?
There may be a coordinate problem with the galvo correction.
No Response After Double-clicking to Open EzCad2
Recently, there is no response after double-clicking of EzCad. There is a corresponding exe process in the win7 task manager, but it cannot be closed. You…
READ MORE ->
How to Use Rotary Marking Pictures?
This is easy to be deformed. You can try RotaryMark . If there is a splicing mark, adjust the Shear compensation and Space compensation.
Error: “Can not find valid lmc1 device”
Can not find valid lmc1 device” and “invalid command” will appear during use, and it will be normal after rebooting, once or twice a day….
READ MORE ->
Error: IPG Laser: Power error!
Laser alarm – check laser status or power off and restart.