The yellow text may be due to excessive power.
EzCad2
How Does the Fiber Laser Marker Print White Text and Date on the Packaging Bag?
Fiber laser marker is easy to print black characters, it is best to use UV laser marker for white text. If you use a fiber laser marker, try…
READ MORE ->
Laser Is Still Marking When the Marking Software Is Turned Off
Fundamentally speaking, this is a normal phenomenon, because the marking command and marking content of the Ezcad software have been sent to the board. If…
READ MORE ->
How to Use a Computer to Control Multiple Lasers for Marking?
Multiple marking boards are required to control multiple lasers and galvos (up to 8), and to connect to the same computer. The boards need to enable the…
READ MORE ->
There Is a Problem of Content Distortion When Using Flying Marking?
First determine whether the calibration of the galvo is accurate, and then accurately calculate the fly speed coefficient of the encoder. Check the Reverse Encoder Signals to make…
READ MORE ->
The Imported Vector File Cannot Be Found on the Interface?
When importing the vector file, select “Show preview” and check “Put to center“.
Laser Marking Card Is Lost During the Marking Process?
a. Check whether the equipment is effectively grounded. b. Check the interference source on the equipment site and do shielding treatment. c. Check the wiring…
READ MORE ->
The Hatch Is Incomplete?
If you find that the filling is not complete, you can select “Auto connect curve“, click Apply.
If You Forget the F3 Parameter Password and User Management Password
The F3 parameter Password is found in the “Plug” folder – “markcfg” to find “PSW=***”, *** is the F3 parameter password. The user management password is in the “Param” folder – after opening…
READ MORE ->
How to Change the Ezcad Software Language?
The language packs currently installed on your computer are displayed here. The languages included in the software are Simplified Chinese, Traditional Chinese, English, Japanese, and…
READ MORE ->