The diagram shows the selection of the expansion axis program. The corresponding axis control is selected. The axis control can be parameterized, such as the…
READ MORE ->
Machine Parameter: Scanner
Scanner type: Currently supports 16-bit, 18-bit XY2-100, and NEWSON 18-bit and NEWSON 20-bit.
Machine Parameter: Dynamic Focus
Enable: Whether to enable dynamic focus mode.
Machine Parameter: 3D
Enable: Whether to enable 3D mode.
Machine Parameter: Fly Mark
1)Enable: Enable the fly marking function. 2)Enable speed simulation: Enable the pipeline speed in hardware simulation mode. 3)Pipeline from right to left: Check to indicate…
READ MORE ->
Machine Parameter: Red light pointer
1)Show contour: Show all outlines. 2)Light speed: Indicates the speed of the system when indicated by red light. 3)Offset PosX: When the red light deviates…
READ MORE ->
Machine Parameter: Port
Input port 1)Input IO mask: Set the input port that the current software allows, and increase or change the input port that can be used….
READ MORE ->
Machine Parameter: Laser Control
Laser type 1)Fiber: Indicates current laser type is fiber laser. 2)CO2: Indicates the current laser type is CO2 laser. 3)YAG: Indicates the current laser type…
READ MORE ->
Machine Parameter: Field
Field 1)Size: The actual maximum marking range corresponding to galvanometer. 2)galvo2=x: Represents the galvo mirror output signal 2 of the control card as the x…
READ MORE ->
Process: Mark control
Red: The outer frame of the figure to be marked is marked, but no laser is used to indicate the processing area so that the…
READ MORE ->