Machine Parameter: Fly Mark

1)Enable: Enable the fly marking function.

2)Enable speed simulation: Enable the pipeline speed in hardware simulation mode.

3)Pipeline from right to left: Check to indicate that the software thinks the flow direction is from right to left.

4)Keep ent order: Check this box to indicate that the software will mark the contents of the workspace one by one in the order of the object list. The position of the marking position is the same as the drawing position, and the relative position between multiple objects can be guaranteed to be the same as the drawing position.

5)Encoder signal reversed: Checked to invert the encoder output signal that the software will accept.

6)Only encoder A: The board only reads the phase A signal of the encoder and shields the phase B signal.

7)Flight error correction factor: reserve.