Machine Parameter: Field

Field

1)Size: The actual maximum marking range corresponding to galvanometer.

2)galvo2=x: Represents the galvo mirror output signal 2 of the control card as the x axis of the user coordinate system.

3)Reverse X: Indicates that the output of the current galvo x is reversed.

4)Reverse y: Indicates that the output of the current galvanometer y is reversed.

Calibration

Is external calibration file enabled?

Transform

1)Offset X: When processing, the X coordinate offset of each point of the workspace, such as the original point coordinate X is 20, the offset X is -20, the actual processing is X is 0 .

2)Offset Y: The Y coordinate offset of each point in the workspace during table processing.

3)Offset Z: Z coordinate offset of each point in workspace when table is processed.

4)Angle: A coordinate offset of each point in the workspace when the table is being processed.

Goto pos after mark

Set the oscillating mirror to the specified position after the current machining is set.

Limit parameter

1)Min speed: The galvanometer movement allows to set the minimum speed.

2)Max speed: The galvanometer movement allows the set maximum speed.

3)Minimum linear length: The minimum linear length of the composition curve.

4)Curve scatter tolerance: The maximum chord-level error of a curve discretized into a straight line.